The alternative to classic floor panels or parquet is vinyl components. They are highly aesthetic, as well as resistance to damage. Their assembly also does not cause special problems if you carefully read the manufacturer's instructions. In the article, we give, including two most popular ways to lay vinyl panels. The basis of the base
As when laying any gender, and in the case of vinyl panels, this is the first and mandatory step. Some finishing materials can be easily laid on old floors, the main thing is that they are in good technical condition. It is best, of course, count on a correctly aligned and cleaned screed. Under panels of this type can be ceramic tiles, wooden boards, parquet or PVC floor, the main thing is that it is closely connected with the base. Before laying a new floor, all surfaces should be primed. The laying of vinyl panels is simple and can be carried out in two ways: gluing or in a clicking system. Before this, however, do not forget to acclimatize the material - the panels must freely lie down for at least a day in the target room. Paul floor
This is the term used to describe the method without the use of glue. The screed should first be covered with a plastic film no thinner than 0.2 millimeters, which will provide isolation from moisture. The most important role is played by the assembly of the first row, because its appearance will depend on how the entire floor in the room will look later. Gluing vinyl panels
The second method is, as already mentioned, the fixation of the material to the floor using the glue intended for this. In this matter, it is also worth following the manufacturer's instructions so that the installation goes smoothly, and the floor looks aesthetically pleasing. This method of laying panels is especially recommended in interiors with warm floors or prone to high humidity, for example, in the kitchen. The lower surface of the element should be thoroughly covered with glue of the corresponding thickness. Then carefully press the panel to the floor. After the time required to set the glue, it is worth crushing the panel that make up a roller weighing about 50 kilograms. С помощью зеркала можно регистрироваться, пополнять счет, делать ставки и выводить выигранные деньги в любой выбранной валюте. mostbet.com вход Многие пользователи выбирают именно Мостбет Live ставки, так как могут непосредственно проследить за ходом игры